-
Configuring voice service on a Cisco 2801 Integrated Services Router via Asterisk
So I’ve configured voice service a number of times, but never using Cisco equipment. There’s a business starting up here on Orcas Island and they need a number of lines voice and fax service. I had a spare 2801 router laying around and heard that it’s possible to provision voice service using these machines. So…
-
I should be able to do voice with this hardware now, right?
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c2801 platform with 393216 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xcb80 program…
-
In case you were curious
-
Bringing the VMs back online
okay. New hypervisor hardware. Switching from xen to KVM. I took a snapshot of the xen partitions and moved them to a holding location during migration. I am now imaging these partitions to the LVM block devices: calcifer:/home/cjac# for guest in `ls /usr/src/moonunit-guests/ | grep -v -e etc | awk -F- ‘{print $1}’` ; do…
-
I think perhaps they mean “could join x86 in the server room”
-
This is getting serious.
I might have to visit the HP on which I recently upgraded the iLO firmware… Maybe it would be good if the family visited Seattle. cjac@foxtrot:~$ ps auwx | grep ‘ping ad0.colliertech.o’ cjac 8411 0.0 0.0 10692 920 pts/8 S+ Apr25 0:32 ping ad0.colliertech.org cjac@foxtrot:~$ ping ad0.colliertech.org PING ad0.colliertech.org (208.115.126.68) 56(84) bytes of data. 64…
-
I do it to myself…
cjac@foxtrot:/var/shares/charles-share/downloads/torrent$ ping ad0.colliertech.org PING ad0.colliertech.org (208.115.126.68) 56(84) bytes of data. 64 bytes from ad0.colliertech.org (208.115.126.68): icmp_req=1 ttl=52 time=23.5 ms 64 bytes from ad0.colliertech.org (208.115.126.68): icmp_req=2 ttl=52 time=18.9 ms 64 bytes from ad0.colliertech.org (208.115.126.68): icmp_req=3 ttl=52 time=15.2 ms 64 bytes from ad0.colliertech.org (208.115.126.68): icmp_req=4 ttl=52 time=41.5 ms 64 bytes from ad0.colliertech.org (208.115.126.68): icmp_req=5 ttl=52 time=31.1 ms…
-
Relatively high sustained rates detected along I-405
$ scp moonunit.colliertech.org:/mnt/downloads/sh1-disk-20140420T070034.xz . cjac@moonunit.colliertech.org’s password: sh1-disk-20140420T070034.xz 76% 534MB 11.1MB/s 00:14 ETA Come on little internet! You can do it! You can push 100Mbit! I remember when this was the fastest I could send data across my LAN. Not bad for a 20 mile shot up I-405. Sorry if I caused any congestion there, folks.…
-
Windows is *still* loading files
-
Gotta’ get ’em all.